The Hydrogen Fuel Cell Inverter has 1) Fuel Cell Control Card: A State of the art PIC based controller is pertained for this JOB • PI-Controller on Voltage Loop: To regulate the output voltage by manipulating the inlet Hydrogen Flow. • P-Controller on the Temperature Loop: To regulate the Fuel Cell Temperature by controlling the FAN speed, • Time Based purge control. • Over Temperature Shutdown Protection 2) Inverter Card: It's a 300W Switched Mode Technology Inverter with Output voltage Regulation • Topology: Isolated Flyback Transformer • Wave Form: Modified Sine Wave • Output: 220V 50Hz AC, 300W (maximum) • Input: 9 to 15 VDC 3) Batteries: 6v x 2 Sealed Lead Acid Batteries, Just to Startup the Fuel Cell, once it get start the Batteries Disconnect automatically then goes in charging Mode (Just like Car Battery). 4) Fuel Cell Stack (H-100): • Rated Power: 100W • Voltage: 14v @ 7.2A • Fuel: Pure Hydrogen 5) Valves: • Inlet: Hydrogen Solenoid Valve. • Outlet: Purge Solenoid Valve. To watch Hydrogen Fuel Cell in Working Form www.youtube.com Regards Asad
Monday, December 3, 2012
Hydrogen Fuel Cell Inverter
Hydrogen Fuel Cell Inverter Video Clips. Duration : 2.33 Mins.
The Hydrogen Fuel Cell Inverter has 1) Fuel Cell Control Card: A State of the art PIC based controller is pertained for this JOB • PI-Controller on Voltage Loop: To regulate the output voltage by manipulating the inlet Hydrogen Flow. • P-Controller on the Temperature Loop: To regulate the Fuel Cell Temperature by controlling the FAN speed, • Time Based purge control. • Over Temperature Shutdown Protection 2) Inverter Card: It's a 300W Switched Mode Technology Inverter with Output voltage Regulation • Topology: Isolated Flyback Transformer • Wave Form: Modified Sine Wave • Output: 220V 50Hz AC, 300W (maximum) • Input: 9 to 15 VDC 3) Batteries: 6v x 2 Sealed Lead Acid Batteries, Just to Startup the Fuel Cell, once it get start the Batteries Disconnect automatically then goes in charging Mode (Just like Car Battery). 4) Fuel Cell Stack (H-100): • Rated Power: 100W • Voltage: 14v @ 7.2A • Fuel: Pure Hydrogen 5) Valves: • Inlet: Hydrogen Solenoid Valve. • Outlet: Purge Solenoid Valve. To watch Hydrogen Fuel Cell in Working Form www.youtube.com Regards Asad
The Hydrogen Fuel Cell Inverter has 1) Fuel Cell Control Card: A State of the art PIC based controller is pertained for this JOB • PI-Controller on Voltage Loop: To regulate the output voltage by manipulating the inlet Hydrogen Flow. • P-Controller on the Temperature Loop: To regulate the Fuel Cell Temperature by controlling the FAN speed, • Time Based purge control. • Over Temperature Shutdown Protection 2) Inverter Card: It's a 300W Switched Mode Technology Inverter with Output voltage Regulation • Topology: Isolated Flyback Transformer • Wave Form: Modified Sine Wave • Output: 220V 50Hz AC, 300W (maximum) • Input: 9 to 15 VDC 3) Batteries: 6v x 2 Sealed Lead Acid Batteries, Just to Startup the Fuel Cell, once it get start the Batteries Disconnect automatically then goes in charging Mode (Just like Car Battery). 4) Fuel Cell Stack (H-100): • Rated Power: 100W • Voltage: 14v @ 7.2A • Fuel: Pure Hydrogen 5) Valves: • Inlet: Hydrogen Solenoid Valve. • Outlet: Purge Solenoid Valve. To watch Hydrogen Fuel Cell in Working Form www.youtube.com Regards Asad
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment